Water Solution – One Call Ahead
Enquire? Send Your Mail
Optima Water Solutions is an EDI Systems Supplier in Mumbai. We supply and install Electrodeionization (EDI) Systems for ultrapure water production used in pharmaceutical, semiconductor, power, and high-purity chemical manufacturing. Our ISO 9001:2015 certified EDI systems remove the need for chemical regeneration, producing consistently high-purity water (resistivity 10–18 MΩ·cm) with minimal environmental impact.
What is a EDI Systems?
Electrodeionization (EDI) is a continuous electrochemical ion exchange process that uses ion exchange membranes, resins, and a DC electric current to remove dissolved ionics from water — producing ultrapure water without the chemical regeneration required by conventional ion exchange (DM plant) systems.
EDI operates as a polishing step after Reverse Osmosis (RO) to produce high-purity water meeting USP Purified Water, ASTM Type I/II, and semiconductor grade specifications. Output water typically has resistivity of 10–18 MΩ·cm and TDS below 0.1 ppm.
Key advantages over conventional DM plants: no acid/alkali regeneration chemicals, continuous 24/7 operation, consistent output quality, and lower hazardous waste.
EDI Systems in Mumbai — Why It Matters
Mumbai's EDI demand concentrates in Taloja and Ambernath's pharmaceutical manufacturing base, where EDI typically completes a treatment train that starts with RO and needs to reach a specific ultrapure water standard for formulation use.
Given pharma's regulatory scrutiny, EDI system documentation and validation matter as much as the equipment itself for Mumbai clients.
Key industrial areas we serve in Mumbai:
Regulatory Note: Maharashtra Pollution Control Board (MPCB) enforces strict Category Red industry norms. Large residential projects above 20,000 sqm require MPCB-approved STP.
Our 4-Step Process — From Design to Handover
1
Feed Water Analysis
RO permeate quality analysis — conductivity, silica, CO2. EDI module selection and stack design.
2
System Engineering
EDI module array design. Pre-treatment requirements — degasser, polisher. Control system design.
3
Supply & Integration
EDI modules from leading manufacturers (SnowPure, Siemens, GE). Integration with existing RO system.
4
Commissioning & Validation
Performance qualification (PQ). USP/ASTM water quality testing. IQ/OQ/PQ documentation for pharma clients.
Why Choose Optima Water Solutions
- Chemical-free operation — no acid, caustic, or salt regeneration required
- Continuous 24/7 operation — no downtime for regeneration cycles
- Consistent ultrapure water quality — resistivity 10–18 MΩ·cm
- USP Purified Water and WFI-grade output for pharmaceutical applications
- Lower lifecycle cost than conventional DM plant with chemical costs eliminated
- Safe operation — no chemical handling, storage, or neutralisation pit required
- Compact installation — modular EDI stacks, small footprint
- SCADA integration — continuous quality monitoring, alerts
- IQ/OQ/PQ validation documentation for GMP pharmaceutical facilities
- AMC and module replacement services available in {city}
Industries & Applications in Mumbai
Pharmaceutical (USP PW)
Semiconductor Mfg
Power Plant Boiler
Electronics Mfg
Laboratory Water
Chemical Manufacturing
Solar Cell Production
Medical Devices
Need a EDI Systems in Mumbai?
Get a free site visit and custom proposal from our engineers within 48 hours. ISO 9001:2015 certified. 158+ projects delivered across India.
EDI Systems in Other Cities
Related Services in Mumbai
Learn More About EDI Systems
Common Questions
EDI Systems in Mumbai — FAQ
Why do Mumbai pharma units need EDI specifically?
EDI removes residual ions that RO alone can't fully address, completing the treatment train needed to reach the ultrapure water standard pharma formulations near Taloja and Ambernath require.
What does an EDI system cost in Mumbai?
Cost typically runs ₹18 Lakh to ₹90 Lakh depending on capacity and purity specification. Call +91 9711880791 for an assessment specific to your formulation.
Does Optima provide validation documentation for Mumbai pharma EDI systems?
Yes, given the regulatory scrutiny pharma manufacturing faces, we provide documentation supporting your validation process.
How does Optima size EDI systems for Mumbai pharma clients?
We work with your process engineers to confirm the exact purity specification your formulation requires before finalising the design.
Ready to Start?
Our engineers in Mumbai are available for a free site visit and assessment.