Water Solution – One Call Ahead
Water Solution – One Call Ahead
Enquire? Send Your Mail
Optima Water Solutions is an STP Plant Manufacturer in Uzbekistan. We design, install, commission, and maintain Sewage Treatment Plant systems, and hold ISO 9001:2015 certification with 12+ years of experience and 158+ completed projects across India. Our STP systems meet CPCB compliance standards and serve residential societies, commercial complexes, and industrial facilities in Uzbekistan.
A Sewage Treatment Plant (STP) is a facility that processes domestic and municipal wastewater to remove contaminants before the treated water is discharged or reused. The process involves physical, biological, and chemical treatment stages that remove suspended solids, organic matter, nutrients, and pathogens.
Modern STP systems use technologies including MBBR (Moving Bed Biofilm Reactor), MBR (Membrane Bioreactor), SBR (Sequencing Batch Reactor), and conventional activated sludge processes — each suited to different capacities and site conditions.
In India, STPs are mandatory for residential societies above 20,000 sqm built-up area, commercial complexes, hotels, hospitals, and all industrial facilities discharging domestic effluent — as per CPCB norms and local Pollution Control Board regulations.
Facilities in Uzbekistan looking for STP capacity face the same core question every export client does: how much can be pre-built and shipped versus built on site. Our containerised systems are designed specifically to shift that balance toward the former. This is especially relevant around Navoi Free Economic Zone, Angren Special Industrial Zone, Jizzakh Special Industrial Zone, where State Committee for Ecology and Environmental Protection of Uzbekistan regulates effluent.
We've shipped STP systems to Uzbekistan as part of our wider export program covering 30+ countries, with each unit factory-tested before it leaves India. Commissioning support is provided remotely for smaller packaged units and on-site for larger custom installations.
Key industrial areas we serve in Uzbekistan:
For most Uzbekistan enquiries, sizing starts with expected daily flow and available space at the destination site — the same starting point as any project, adjusted for shipping constraints. Containerised units suit sites with limited local civil contracting capacity, since most of the build happens in our India facility before the unit ships. Larger sites typically move to a modular skid-based design instead.
Free site visit. Wastewater characterisation. Custom system design based on flow rate, BOD, COD, and discharge norms.
In-house fabrication at our Delhi NCR facility. All components tested before dispatch. Delivery to your site across India.
Expert installation team. Civil work coordination. Full commissioning with performance testing to CPCB standards.
Operator training. Annual Maintenance Contracts available. 24/7 emergency support. Guaranteed uptime.
Residential Societies
Hotels & Resorts
Hospitals
Commercial Complexes
Industrial Plants
Construction Sites
Educational Institutions
Government Projects
Get a free site visit and custom proposal from our engineers within 48 hours. ISO 9001:2015 certified. 158+ projects delivered across India.
Optima manufactures in India and exports STP systems to Uzbekistan as part of our wider export program covering 30+ countries. Units are factory-tested before shipping, with remote or on-site commissioning support depending on system size.
Container shipping to Uzbekistan typically takes several weeks depending on route and customs clearance, after which a containerised unit can be operational within days of arrival. We provide a project-specific timeline once the order and destination port are confirmed.
Optima is ISO 9001:2015 certified, and our export documentation is prepared to match the import and customs requirements of the destination country. Contact us with your project specifics for the exact documentation your site will need.
Yes. For containerised and smaller packaged systems, we typically support commissioning remotely with detailed guidance. For larger custom installations in Uzbekistan, we can arrange an on-site engineer depending on project scope.
Share your expected flow rate, site conditions, and destination port, and we'll provide a quote covering equipment, shipping, and installation support for Uzbekistan. Call +91 9711880791 or use our export enquiry form.
Our engineers in Uzbekistan are available for a free site visit and assessment.
Optima Water Solutions exports water & wastewater treatment plants to Uzbekistan and 30+ other countries. See all countries we export to →